BS EN 10165-1996 Cold rolled electrical alloyed steel sheet and strip delivered in the semi-process
|
ID： |
E599065AFF03462DBF63152636A1A5BA |
|
文件大小(MB)： |
0.2 |
|
页数： |
16 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10165:1996,Cold rolled electrical,alloyed steel sheet and,strip delivered in the,semi-processed state,The European Standard EN 10165:1995 has the status of a,British Standard,ICS 29.040.10; 77.140.50,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:31:35 BST 2006, Uncontrolled Copy, (c) BSI,BS EN 10165:1996,This British Standard, having,been prepared under the,direction of the Engineering,Sector Board, was published,under the authority of the,Standards Board and comes,into effect on,15 July 1996,. BSI 02-1999,The following BSI references,relate to the work on this,standard:,Committee reference ISE/NFE/5,Draft for comment 93/310713 DC,ISBN 0 580 26221 9,Committees responsible for this,British Standard,The preparation of this British Standard was entrusted to Technical,Committee ISE/NFE/5, Magnetic alloys and steels, upon which the following,bodies were represented:,Association of Manufacturers Allied to the Electrical and Electronic,Industry (BEAMA Ltd.),British Steel Industry,Department of Trade and Industry (National Physical Laboratory),Electricity Supply Industry in England and Wales,Electronic Components Industry Federation,GAMBICA (BEAMA Ltd.),Institute of Physics,Rotating Electrical Machines Association (BEAMA Ltd.),Sunderland Polytechnic (Magnet Centre),Transmission and Distribution Association (BEAMA Ltd.),Wolfson Centre for Magnetic Technology,Co-opted members,Amendments issued since publication,Amd. No. Date Comments,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:31:35 BST 2006, Uncontrolled Copy, (c) BSI,BS EN 10165:1996,. BSI 02-1999 i,Contents,Page,Committees responsible Inside front cover,National foreword ii,Foreword 2,Text of EN 10165 3,List of references Inside back cover,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:31:35 BST 2006, Uncontrolled Copy, (c) BSI,BS EN 10165:1996,ii . BSI 02-1999,National foreword,This British Standard has been prepared by Technical Committee ISE/NFE/5,and is the English language version of EN 10165:1995, published by the,European Committee for Standardization (CEN).,This British Standard supersedes BS 6404-8.2:1986 which is withdrawn.,A British Standard does not purport to include all the necessary provisions of a,contract. Users of British Standards are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Cross-references,Publication referred to Corresponding British Standard,BS 4727 Glossary of electrotechnical, power,telecommunication, electronics, lighting and colour terms,Part 1: Terms common to power, telecommunications and,electronics,IEC 50(121):1978 Group 01:1983 Fundamental terminology,IEC 50(221):1990 Group 07:1991 Magnetic materials and components,IEC 404-1:1979 BS 6404: Magnetic materials,Part 1:1984: Classification,IEC 404-2:1978 Part 2:1996 Methods of measurement of magnetic,electrical and physical properties of magnetic sheet and,strip,IEC 404-3:1992 Part 3:1992 Methods of measurement of the magnetic,properties of magnetic sheet and strip by means of a,single sheet tester,EN 10020:1988 BS EN 10020:1991 Definition and classification of grades,of steel,EN 10021:1993 BS EN 10021:1993 General technical delivery,requirements for steel and iron products,EN 10027-1:1992 BS EN 10027 : Designation systems for steel,Part 1:1992 Steel names, principal symbols,EN 10027-2:1992 Part 2: Steel numbers,EN 10204:1991 BS EN 10204:1991 Metallic products. Types of inspection,documents,EN 10251a BS EN 10251: Magnetic materials. Methods of,determination of the geometrical characteristics of,electrical steel sheet and stripa,a In preparation.,Summary of pages,This document comprises a front cover, an inside front cover, pages i and ii,the EN title page, pages 2 to 10, an inside back cover and a back cover.,This standard has been updated (see copyright date) and may have had,amendments incorporated. This will be indicated in the amendment table on,the inside front cover.,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:31:35 BST 2006, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10165,December 1995,ICS 29.040.10; 77.140.50,Descriptors: Cold rolled products, metal plates, magnetic alloys, magnetic circuits, alloyed steels, delivery conditions, classifications,designation, magnetic properties, geometric characteristics, physical properties, acceptance tests, quality, tests,English version,Cold rolled electrical alloyed steel sheet and stri……
……